STL file · Digital download
Double Sleeve Dispenser STL
Two sleeve slots and two rear card pockets
$7.99
Get the files on
What the personal license allows
- Allowed: Print for your own collection
- Allowed: Print gifts for friends and family
- Not allowed: Sell printed copies or physical products made from this file
- Not allowed: Resell, share, distribute or upload the file
- Not allowed: Modify and redistribute the design
- Not allowed: Claim the design as your own
Full license PDF included.
Checkout on the store you pick · No physical item ships
Buy the finished piece
Want it printed?
Two sleeve slots up front and two card pockets in the back, built for a busy desk or shop counter. This is the same Double Sleeve Dispenser we sell finished, now as a file for your own printer.
The details
This is a digital download. No physical item is shipped. It includes a Personal Use License for your own printing.
Why collectors love it
- Two sleeve slots: about 1,600 penny sleeves or 800 deck sleeves total
- Two rear card pockets, about 25 cards each
- 6.2 x 4.5 in footprint for a desk or shop counter
- Prints as one piece with no supports
- Bambu Studio .3mf included with solid, Pokeball and two-tone plates already painted
What you'll receive
- CDFORGE_DoubleSleeveDispenser.stl (already oriented)
- CDFORGE_DoubleSleeveDispenser.3mf (Bambu Studio project, 3 plates)
- 5-page guide PDF: what it holds, print settings, color versions and care
- Personal Use License PDF
Print settings we use
- Printer: Bambu Lab P1P
- Layer height: 0.2 mm, first layer 0.18 mm
- Walls: 2 loops, 5 top layers, 3 bottom layers
- Infill: 15% gyroid
- Supports: none
- Brim: brim ears at the corners (already placed in the .3mf). Slicing the STL yourself? Add brim ears at the corners so the tall walls stay down.
- Orientation: open side up, flat on the bed (already oriented)
- About 5 hr 46 min and 186 g of PLA
Color versions
- Solid: any single color, no changes
- Pokeball: white to 13.18 mm, black to 17.18 mm, red above
- Two-tone: base color to 13.18 mm, wall color above
Size
- 6.19 x 4.49 x 4.17 in (157 x 114 x 106 mm)
- Sleeve slots about 3.07 x 4.3 in, rear pockets fit 2.5 x 3.5 in cards
- Needs a 165 x 120 mm build area
Important notes
- Digital download only. No physical item, cards or supplies are shipped.
- STL files need a 3D printer and slicer software.
- The CD.Forge logo is part of the model.
- Results depend on your printer, filament and settings. The person printing is responsible for the finished item.
Personal use license
- Allowed: Print for your own collection
- Allowed: Print gifts for friends and family
- Not allowed: Sell printed copies or physical products made from this file
- Not allowed: Resell, share, distribute or upload the file
- Not allowed: Modify and redistribute the design
- Not allowed: Claim the design as your own
Full license PDF included.
