STL file · Digital download
Golf Hole STL
Sink putts into a 4.25in regulation cup at home
Personal use license · Print it for yourself and as gifts.
$3.99
Get the files on
What the personal license allows
- Allowed: Print for your own collection
- Allowed: Print gifts for friends and family
- Not allowed: Sell printed copies or physical products made from this file
- Not allowed: Resell, share, distribute or upload the file
- Not allowed: Modify and redistribute the design
- Not allowed: Claim the design as your own
Full license PDF included.
Checkout on the store you pick · No physical item ships
Practice putting anywhere with a low-profile putting hole built around a regulation 4.25 in cup. It sits flat on a putting mat, carpet or simulator floor, and the gentle slope lets the ball roll in like on a real green.
The details
This is a digital download. No physical item is shipped. It includes a Personal Use License for your own printing.
Why golfers love it
- Regulation size 4.25 in (108 mm) cup
- Low-profile base with a shallow slope for a true roll-in
- Flag pole and flag included: they press-fit together and into the rim, with grip ribs, so the flag stays on and faces the way you set it
- Any printer: a thin black hole cover lines the cup floor. With an AMS: print the base in green and black in one go
- Hanging hole in the rim for storage
- No supports. Bambu Studio .3mf with one plate per part and the brim ears already placed
What you'll receive
- CDFORGE_GolfPuttingHole_STLs.zip (6 STL files: base, hole cover, flag pole, flag, and the 2-color base as green and black STLs, already oriented)
- CDFORGE_GolfPuttingHole.3mf (Bambu Studio project, 5 plates: one per part and color, plus a 2-color base plate for AMS printers)
- 5-page guide PDF: what you get, print settings, assembly and care
- Personal Use License PDF
Print settings we use
- Printer: Bambu Lab P1P, 0.4 mm nozzle
- Layer height: 0.2 mm, first layer 0.22 mm
- Walls: 2 loops (4 on the flag pole and flag, already set), 5 top layers, 3 bottom layers
- Infill: 10% grid
- Supports: none
- Brim: brim ears on every part (already placed in the .3mf). Slicing the STLs yourself? Add brim ears around the base, the hole cover, both ends of the pole and the foot of the flag.
- Orientation: base flat side down, flag pole lying on a flat side, flag standing up (already oriented)
- Full set: about 3 hr 9 min and 66 g of PLA
- Base about 2 hr 4 min, 54 g. Hole cover about 21 min, 4.7 g. Flag pole about 14 min, 2.8 g. Flag about 30 min, 4.4 g
- 2-color base for AMS (instead of the base and hole cover): about 1 hr 58 min, 50 g, 4 color swaps
Assembly
- One-color base: drop the hole cover into the cup, with its notch lined up with the flag pole socket (the 2-color base needs no cover)
- Press the flag onto one end of the pole until it stops
- Press the other end of the pole into the socket on the rim and start putting
Size
- Base 6.3 in (160 mm) across, 0.55 in (14 mm) tall at the flag socket
- Cup 4.25 in (108 mm)
- Flag pole 2.83 in (72 mm) long, flag 42 x 30 mm with its sleeve. The flag top stands 3.6 in (91 mm) above the floor
- Needs a print bed of at least 170 x 170 mm, so it prints on the Bambu A1 mini too.
Important notes
- Digital download only. No physical item or golf balls are shipped.
- Made for indoor use. PLA softens in heat and sun, so do not leave it outdoors.
- STL files need a 3D printer and slicer software.
- Results depend on your printer, filament and settings. The person printing is responsible for the finished item.
Personal use license
- Allowed: Print for your own collection
- Allowed: Print gifts for friends and family
- Not allowed: Sell printed copies or physical products made from this file
- Not allowed: Resell, share, distribute or upload the file
- Not allowed: Modify and redistribute the design
- Not allowed: Claim the design as your own
Full license PDF included.
