TCG Card Displays
Modular Card Stadium
A stepped card display that grows one section at a time
- Modular
- Two-tone option
- Free US shipping
From $14.99
Checkout on Etsy · Printed to order in your colors
Modular Card Stadium: a stepped trading card display that grows with your collection, one section at a time

Color Studio
Try your colors first
Pick from every CD.Forge filament, see your combo on the real model, then copy your choices into the Etsy order.
Open in Color StudioModular
Built to grow
Pieces connect to each other, so you can start small and add more as your collection grows.
The details
Show off your best pulls on a desk, a shelf, a stream or a card show table. Each section holds 8 cards on 4 stepped rows, and sections join side by side with hidden connectors, so a 1 section stand can grow into a full wall later. Want it taller? Our Stadium Risers lift a second stadium behind the first for a two-tier, 8-row display.
What's included
- The number of sections you pick (8 cards per section)
- Add text or Add my logo: one name or logo plate plus a pair of half plates, so it can sit on one section or be centred across a joint
- Blank plates fill the plate rail on the other sections
- 3 hidden connectors per section, enough for every joint plus a spare set, and 6 more with end caps
- 4 non-slip rubber feet per section
- End caps if you add them
- 2x2 and 3x2 Tier bundles: two stadiums, end caps on both and 2 or 3 Stadium Risers.
- Cards, holders and slabs are not included
Why collectors love it
- Fits 3x4 top loaders, 35pt magnetic holders and graded slabs from PSA, BGS, CGC, TAG, AGS and SGC (slab bumpers up to about 11.5 mm)
- Thicker or oversized holders are not tested: message us first if yours are not on this list
- Modular: one identical section repeats to any width, no tools, no glue, no screws
- The joints are hidden, and a card can sit right across a joint
- Every row leans back 9 degrees and steps up 50 mm, with a 40 mm backrest behind the top row
- 4 non-slip rubber feet per section keep the wall steady on your desk
- Drop-in name plate rail across the front: blank plates, or your logo or name centred on the wall
- Not just cards: anything flat up to about 1/2 in (12 mm) thick fits, like CD cases, game cases, sealed packs, coin slabs, pin cards and prints
How to order
- Bundle size: 1, 2 or 3 Sections with or without end caps, a 2x2 or 3x2 Tier with risers, or 1, 2 or 3 Stadium Risers on their own. Already own a stadium? Pick End caps only or Name Plate only. Stadium Risers on their own come in Black with No logo only.
- Color Style: Black, Single color, Two-tone or Three-tone
- Name plate option: No logo, Add text (your name or shop name, 1 color, 1 of our 10 fonts) or Add my logo (your logo, up to 3 colors). One plate per order.
- Fill in Card Stadium Colors (Black or Single Color) or Card Stadium Color (Two/Three-tone), then Name Plate (Add text) or Name Plate (Add a logo) if you added a plate.
Want a bigger wall? Order 3 sections with end caps, then add single sections to the same cart (for example 3 + 1 + 1 for a 5 section wall).
Sizes
- 1 section: 8 cards, 7.1 in wide
- 2 sections: 16 cards, 14.1 in wide
- 3 sections: 24 cards, 21.2 in wide
- Every extra section adds 8 cards and 7.1 in
- With end caps: 7.9, 15.0 and 22.0 in wide for 1, 2 and 3 sections
- 2x2 Tier + 2 Risers: 32 cards, 15.0 in wide, 12.2 in deep, 17.7 in tall (about 19.8 in to the card tops)
- 3x2 Tier + 3 Risers: 48 cards, 22.0 in wide, 12.2 in deep, 17.7 in tall (about 19.8 in to the card tops)
Each section is 7.1 x 4.9 x 9.8 in (179 x 125 x 250 mm). End caps are 0.3 in (8 mm) thick, 0.4 in (11 mm) at the base, and add about 0.9 in (22 mm) to the wall width.
Rows overlap like stadium seats: the top row shows the whole card, the lower rows show about the top half of each top loader.
End caps (optional)
A matched Left + Right pair that closes the ends of the wall: it finishes the card slots and the plate rail, and rises a little above the top step. The base wraps around each cap's outer face and corners to finish the platform. Same connectors, same style as your sections. One pair per wall, whatever its size. Adding sections later? Move the right cap to the new end. Already own a stadium? Pick End caps only in Bundle size.
Stadium risers (two tiers)
A riser lifts a second stadium 7.9 in behind the first, so its rows carry on at the same step and the whole thing reads as one tall 8-row display. Use one riser under each back section. Risers are black only, join side by side, lock to the stadiums with the same hidden connectors, and have push-in rear feet for the back row. Each riser is 7.1 x 4.9 x 7.9 in (7.3 in deep with its feet). Pick a 2x2 or 3x2 Tier bundle, or 1, 2 or 3 Stadium Risers on their own. Already own a stadium? Order one riser for each back section, plus a second stadium in your colors to sit on top. Each riser comes with its 2 push-in rear feet and connectors.
Name plates and logos
- Add text: your name or shop name in one color and one of our 10 fonts. Pick them in the Color Studio, or type the text, font and text color in the Name Plate (Add text) box. Text is case sensitive: type it exactly how you want it (some fonts are capitals only; Color Studio shows each font).
- Add my logo: paste a link to your logo in the Name Plate (Add a logo) box (a Google Drive file shared with us, or a website), or send it in Etsy messages after you order. A PNG works best. We redraw it for printing with up to 3 colors and send you a proof to approve before we print.
- Either plate comes with a pair of half plates, so it can sit on any section or be centred across a joint.
- One name or logo plate per order. Want another? Order again and pick Name Plate only in Bundle size.
- The other sections get blank plates in your body color.
- We print your own logo or business name only. We can't print team, game, brand or character logos you don't own.
- Need a spare blank plate? Pick Name Plate only with No logo.
Color styles
- Black: the whole stadium in black
- Single color: any one of our 60+ colors (for all black, pick Black)
- Two-tone: body color plus a base color
- Three-tone: body, base and stripe in any 3 colors you choose, for example a red, white and black ball style
Two-tone and Three-tone: type your colors in the Card Stadium Color box: 1. Body, 2. Base, 3. Stripe.
Want physical samples first? Order PLA color swatches:
Material & care
Made from durable PLA. Keep it out of direct sunlight and hot cars. Wipe clean with a dry or lightly damp cloth. Minor layer lines are natural to 3D printing.
Made to order
Each section is 3D printed to order in your colors, about 12 hours per section, on a first-come, queue-based basis. Logo orders start printing once you approve the proof. Ships free from Metro Atlanta by USPS Ground Advantage. Need it by a certain date? Message us before ordering to confirm timing.
About the photos
The slides use 3D renderings of our actual model, shown as it really prints. Photos 1, 2, 5, 6, 8, 9 and 14 use AI-made scenes (on 14, the background only) made from those renderings to show the stadium in use at true scale. Real photos are coming soon. Cards, holders and slabs in the photos are not included.



