STL file · Digital download
35pt Magnetic Card Frame STL
Snap cards in and out of a wall display, no screws
5 · 1 review- Bestseller
$4.99
Get the files on
What the personal license allows
- Allowed: Print for your own collection
- Allowed: Print gifts for friends and family
- Not allowed: Sell printed copies or physical products made from this file
- Not allowed: Resell, share, distribute or upload the file
- Not allowed: Modify and redistribute the design
- Not allowed: Claim the design as your own
Full license PDF included.
Checkout on the store you pick · No physical item ships
Buy the finished piece
Want it printed?
Give your 35pt magnetic one-touch holders a proper spot on the wall. The frame keeps the card fully on show and hangs portrait or landscape on a single nail. This is the same 35pt Magnetic Card Frame we print and sell finished, now as a file for your own printer.
The details
This is a digital download. No physical item is shipped. It includes a Personal Use License for your own printing.
Why collectors love it
- Fits one standard 35pt magnetic one-touch holder. 35pt only: it does not fit other magnetic holder sizes
- Hangs portrait or landscape on one nail or screw, with hanging points on the top edge and the side
- Two parts, the frame and a back, with no supports
- Bambu Studio .3mf with production settings and the brim ears already placed
- Print the frame in any color and the back in black, like ours
What you'll receive
- CDFORGE_MagneticCardFrame35pt_Frame.stl (already oriented)
- CDFORGE_MagneticCardFrame35pt_Back.stl (already oriented)
- CDFORGE_MagneticCardFrame35pt.3mf (Bambu Studio project, 3 plates: one complete set, 3 frames, 6 backs)
- 5-page guide PDF: what it holds, print settings, assembly, hanging and care
- Personal Use License PDF
Print settings we use
- Printer: Bambu Lab P1P, 0.4 mm nozzle
- Layer height: 0.2 mm, first layer 0.22 mm
- Walls: 2 loops, 5 top layers, 3 bottom layers
- Infill: 10% grid
- Supports: none
- Brim: brim ears on the frame and the back (already placed in the .3mf). Slicing the STLs yourself? Add brim ears to the corners of both parts so they stay flat.
- Orientation: frame face down, back flat with the hanging bar up (already oriented)
- One complete set: about 2 hr 12 min and 60 g of PLA
- Frame about 1 hr 14 min, 38 g. Back about 46 min, 21 g
Assembly and hanging
- Lay the frame face down and place your magnetic holder in the window
- Set the back on top, text facing you, and press its tabs into the frame
- Hang it on one small nail or screw at the top notch (portrait) or the side notch (landscape)
Size
- Frame 3.67 x 5.83 x 0.59 in (93.3 x 148 x 15.1 mm)
- Back 115.9 x 74.4 mm, sits inside the frame
- Each part fits a 180 x 180 mm bed, so it prints on the Bambu A1 mini too. The .3mf plates are laid out for a 256 x 256 mm bed.
Important notes
- Digital download only. No physical item, magnetic holders or cards are shipped.
- STL files need a 3D printer and slicer software.
- The CD.Forge logo is part of the model (a small tile on the back rim of the frame and the wordmark on the back).
- Results depend on your printer, filament and settings. The person printing is responsible for the finished item.
Personal use license
- Allowed: Print for your own collection
- Allowed: Print gifts for friends and family
- Not allowed: Sell printed copies or physical products made from this file
- Not allowed: Resell, share, distribute or upload the file
- Not allowed: Modify and redistribute the design
- Not allowed: Claim the design as your own
Full license PDF included.
1 review for this item
What buyers say
Buyer photos · 1
