Jumbo Card Frame STL

• Fits one standard 6 x 9 in rigid top loader with a jumbo or oversized card inside
• Made for 6 x 9 in top loaders. It does not fit 3 x 4 in top loaders or graded slabs
• Prints in two halves that lock together with two small connectors, so it fits a normal size print bed
• Hangs portrait on a nail or screw, at the hanging points marked on the back
• No supports. Bambu Studio .3mf with production settings and the brim ears already placed
• Print the frame in any color and the backs in black, like ours

• CDFORGE_JumboCardFrame_STLs.zip (5 STL files: frame halves 1 and 2, backs 1 and 2, connector, already oriented)
• CDFORGE_JumboCardFrame.3mf (Bambu Studio project, 2 plates that make one complete frame)
• 5-page guide PDF: what it holds, print settings, assembly, hanging and care
• Personal Use License PDF

• Printer: Bambu Lab P1P, 0.4 mm nozzle
• Layer height: 0.2 mm, first layer 0.22 mm
• Walls: 2 loops, 5 top layers, 3 bottom layers
• Infill: 10% grid
• Supports: none
• Brim: brim ears on the frame halves and the backs (already placed in the .3mf). Slicing the STLs yourself? Add brim ears to their corners so they stay flat.
• Orientation: frame halves face down, backs flat with the text up (already oriented)
• One complete frame: about 6 hr 1 min and 193 g of PLA
• Plate 1 (frame halves) about 3 hr 27 min, 111 g. Plate 2 (backs and connectors) about 2 hr 34 min, 82 g

• Lay both halves face down, seam edges together, and press a connector into the pockets at each end of the seam
• Place your card in its 6 x 9 in top loader in the window, front facing down
• Fit back 1 into half 1 and back 2 into half 2 (labelled 1/2 and 2/2), text facing you, and press the tabs in
• Hang it on a small nail or screw at the hanging points marked on the back

• Assembled frame 7.35 x 11.65 x 0.61 in (186.7 x 296 x 15.6 mm)
• Each half 186.7 x 148 mm, each back 103 x 167.6 mm
• Needs a print bed of at least 190 x 150 mm. The .3mf plates are laid out for a 256 x 256 mm bed.

• Digital download only. No physical item, top loaders or cards are shipped.
• STL files need a 3D printer and slicer software.
• The CD.Forge logo is part of the model (a small tile on the back rim of frame half 2 and the wordmark on each back).
• Results depend on your printer, filament and settings. The person printing is responsible for the finished item.

• ✓Allowed: Print for your own collection
• ✓Allowed: Print gifts for friends and family
• ×Not allowed: Sell printed copies or physical products made from this file
• ×Not allowed: Resell, share, distribute or upload the file
• ×Not allowed: Modify and redistribute the design
• ×Not allowed: Claim the design as your own

Full license PDF included.